PTA SERIES ANCHORS - PTA 422

PTA 422 Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls.

• They permit vertical deflection of the slab above, without transferring compressive loads to the masonry wall below.
• PTA Tube is not required with the PTA-422. H&B's NS Neoprene Sponge placed between the concrete block and the PTA-422 allows vertical expansion and contraction.
• PTA Series Anchorsare suitable for construction using steel or concrete.

DIMENSIONS/GAUGES:

• 12 ga. thick
• Available for 4”-12” block
• Holes 7/16" dia.

NOTE:

• Special high-load designs can be manufactured on a special order basis contact our technical department for information.